ABSTRACT
Night Vision Enhancer green LED based flashlights are widely used by hunters and others in similar activities to light up their way and alert other hunters of their presence. Green light does not interfere with the hunt, as animals are blind or indifferent to green light. Green is also a good night-vision retention color that allows one to distinguish colors such as yellow and red on maps and charts. In the kit Night Vision Enhancer Key component of this flashlight is a 555 timer that is configured as an Astable multivibrator generating a 50 per cent duty cycle square wave at approximately 6Hz frequency. Three green LEDs are connected at output pin 3 of 555 Timer. Switch S1 is the main on/off switch. In normal mode, LM555 IC is disabled by normally-closed (N/C) push-to-off switch S1 keeping its output low. As a result, all LEDs (D1, D2, and D3) glow continuously. On the other hand, when S2 is depressed, LM555 timer IC is enabled and all LEDs start flashing.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction A Night Vision Enhancer. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-a-night-vision-enhancer/
“Design And Construction A Night Vision Enhancer.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-a-night-vision-enhancer/. Accessed 20 September 2024.
“Design And Construction A Night Vision Enhancer.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-a-night-vision-enhancer/
Here’s a typical structure for Design And Construction A Night Vision Enhancer research projects:
- The title page of Design And Construction A Night Vision Enhancer should include the project title, your name, institution, and date.
- The abstract of Design And Construction A Night Vision Enhancer should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction A Night Vision Enhancer should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction A Night Vision Enhancer, identifying gaps the study aims to fill.
- The methodology section of Design And Construction A Night Vision Enhancer should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction A Night Vision Enhancer research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction A Night Vision Enhancer results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction A Night Vision Enhancer study and restate its significance.
- List all the sources you cited in Design And Construction A Night Vision Enhancer project, following a specific citation style (e.g., APA, MLA, Chicago).