The Turbine Mixer was Fabricated at the Mechanical Engineering Workshop of Institute of Management and Technology, Enugu.
The method of the fabrication of the turbine mixer involved a preliminary computation of the dimensions of the standard turbine in relation to the dimension of the reacting vessel in which they will be used in, making out, cutting out to sizes, rolling folding, welding, body – filling, filling, glass – papering and painting. The total surface area is 10741.5CM2
The first step taken in the fabrication of ht said project was the selection of the material suitable for the construction.
The materials used in the construction were locally sourced and were selected to suit the desired purpose. The mild steel was used instead of galvanized steel due to its relative low cost.
The mild steel was located with paint to prevent corrosion attack and deterioration of the work.
The dimensions of the project were as follow 31.0CM. for the height and –21.0cm for the diameter. The volume [capacity] of the cylinder is 10,74 1.5cm3 the average speed of the turbine mixer is 125pm. The turbine mixer is manually operated a design that is meant to save cost.
Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
1.0 Introduction
1.1 Objectives / scope of the project
CHAPTER TWO
2.0 Literature review
2.1 Agitation and mixing
2.2 Liquid – liquid agitation
2.3 Purpose of agitation
2.4 Types of mixer / mixing equipment
2.5 Application of impeller
2.6 Shaft
2.7 Baffles
2.8 Circulation rates
2.9 Mixers for plastic solids and pastes
2.10 Mixers for dry light solids [powder]
2.11 Material of construction.
CHAPTER THREE
3.0 Fabrication / modification procedure
3.1 Steps of fabrication process
3.2 Cost analysis.
CHAPTER FOUR
4.0 Discussion
4.1 Conclusion
4.2 Recommendation
4.3 Reference
4.4 Nomenclature
CHAPTER FIVE
DISCUSSION
CONCLUSSION
RECOMMENDATION
REFERENCES
APPENDIX / NOMENECLATURE
Construction Of Turbine Mixer. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-turbine-mixer/
“Construction Of Turbine Mixer.” UniTopics, https://www.unitopics.com/project/material/construction-of-turbine-mixer/. Accessed 22 November 2024.
“Construction Of Turbine Mixer.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-turbine-mixer/
Here’s a typical structure for Construction Of Turbine Mixer research projects:
- The title page of Construction Of Turbine Mixer should include the project title, your name, institution, and date.
- The abstract of Construction Of Turbine Mixer should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of Turbine Mixer should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of Turbine Mixer, identifying gaps the study aims to fill.
- The methodology section of Construction Of Turbine Mixer should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of Turbine Mixer research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of Turbine Mixer results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of Turbine Mixer study and restate its significance.
- List all the sources you cited in Construction Of Turbine Mixer project, following a specific citation style (e.g., APA, MLA, Chicago).