The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing it pass through the pores or aperture of the sieve plates.
The process of operation involved the following: marking out of the sieve plate using dimension of 135mm and the shaker basing with dimension 2.4mm on the corrugated iron sheet using a scriber and a steel rule; punching of the market out line using hammer and chisel, cutting of the punched path of the sieve using guillotine, but in the case of the sieve mesh a Shearer was used in the cutting; folding of the corrugated iron using folding machine; drilling of the four holes using drilling machine, welding of the sieve plate and the handles using oxyacetylure flame; filling of the holes on the welded edges with a c-per body filler; smoothening of the sieve plate using sandpaper and lastly the painting and sun drying of the sieve plate using an oil paint.
The shaker base with the dimensions 2.4mm by 1.8mm was fabricated to house the motor, which comprised of a rotor, stator and coil and a capacitor of 2700 coulomb.
In the end, all the parts were assembled and a sieve equipment of commendable and a sieve equipment of commendable efficiency was fabricated with the specified dimensions mentioned above and a regulator.
Title page
Dedication
Acknowledgement
Letter of transmittal
Abstract
CHAPTER ONE
Introduction
CHAPTER TWO
LITERATURE REVIEW
2.1 History of sieve
2.2 Definition of sieve
2.3 Screen surfaces
2.4 Types of screens
2.5 Screens analysis
2.6 Materials for construction
2.7 Selection of materials for construction
2.8 Sieve scale.
CHAPTER THREE
3.1 Constructional procedure
3.2 Safety precautions
CHAPTER FOUR
Discussion
CHAPTER FIVE
5.1 Conclusion and Recommendation
5.2 References
Appendix
Construction Of Sieve Equipment. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-sieve-equipment/
“Construction Of Sieve Equipment.” UniTopics, https://www.unitopics.com/project/material/construction-of-sieve-equipment/. Accessed 20 September 2024.
“Construction Of Sieve Equipment.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/construction-of-sieve-equipment/
Here’s a typical structure for Construction Of Sieve Equipment research projects:
- The title page of Construction Of Sieve Equipment should include the project title, your name, institution, and date.
- The abstract of Construction Of Sieve Equipment should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of Sieve Equipment should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of Sieve Equipment, identifying gaps the study aims to fill.
- The methodology section of Construction Of Sieve Equipment should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of Sieve Equipment research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of Sieve Equipment results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of Sieve Equipment study and restate its significance.
- List all the sources you cited in Construction Of Sieve Equipment project, following a specific citation style (e.g., APA, MLA, Chicago).