Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel.
In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were carried out which included marking out, center punching folding, welding, filling operation, assembling, and painting to beautify the equipment and for other purposes.
The shapes and forms are formulated to obtain the following dimensions of the agitator. These are length of handle = 320mm, diameter of gear teeth = 100mm, thickness of shaft = 20mm, thickness of gear = 12mm, size of blade = 50mm x 100mm, blade diameter = 63mm, inside diameter of pump = 12mm, outside diameter of pump = 20mm, shat height = 470mm, vessel diameter = 340mm and height = 560mm
The agitating mixer has high efficiency of comparable to those produced industrially. The estimated rate of rotation is 1720 rpm.
The cost of construction of the agitator is however minimized due to the preferred choice of the raw material and method of fabrication.
Title page
Letter of transmittal
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
1.0 Introduction
1.1 The objective of the project
CHAPTER TWO
2.1 The theory and concept of agitation
2.2 Type of mixers
2.3 The impeller mixers for liquids
2.31 Paddles
2.32 Turbines
2.33 Propellers
2.4 The particle mixer for free flowing solids
2.5 Mixers for heavy paste or cohesive solids
2.6 Agitator effectiveness & agitation index
2.7 Degree of agitation
2.8 Power consumption in agitators
2.9 Agitation rate
2.10 Materials for the construction of propeller agitator
2.11 Equipments for the fabrication of propeller agitator
CHAPTER THREE
3.1 Construction and fabrication procedure
3.2 Steps of fabrication process
CHAPTER FOUR
4.0 Cost analysis
4.1 Material cost
4.2 Labour cost
CHAPTER FIVE
5.1 Discussion
5.2 Recommendation
5.3 Conclusion
CHAPTER SIX
Nomenclature
References
Construction Of Propeller Agitator. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-propeller-agitator/
“Construction Of Propeller Agitator.” UniTopics, https://www.unitopics.com/project/material/construction-of-propeller-agitator/. Accessed 22 November 2024.
“Construction Of Propeller Agitator.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-propeller-agitator/
Here’s a typical structure for Construction Of Propeller Agitator research projects:
- The title page of Construction Of Propeller Agitator should include the project title, your name, institution, and date.
- The abstract of Construction Of Propeller Agitator should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of Propeller Agitator should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of Propeller Agitator, identifying gaps the study aims to fill.
- The methodology section of Construction Of Propeller Agitator should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of Propeller Agitator research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of Propeller Agitator results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of Propeller Agitator study and restate its significance.
- List all the sources you cited in Construction Of Propeller Agitator project, following a specific citation style (e.g., APA, MLA, Chicago).