The aim of this project was to construct one office table and four chairs.
In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet. Fabrics 4 years, spraying materials and 21b of nail were utilized to effect the construction of office table and chairs.
The materials were marked out to the required sizes, cut, folded, fited, assembled, nail, mort iced and then spraying it finally to prevent corrosion attack
There are the necessary constructional procedure steps adopted in the project. The accuracy and precision with which the construction steps and consequently, the assemblage of the component parts greatly enhanced our aim of constructing a suitable equipment for use of one table and four chairs.
The aim of constructing the table and the chair is to enable chemical Engineering department as future Engineer to know and also learn how to construct an office table or chairs and the essence of it. The cost of production of the office table and chairs as at 7th August, 2005 is N21,000.00
TITLE PAGE
APPROVAL PAGE
LETTER OF TRAMITTAL
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.1 Introduction
CHAPTER TWO
2.0 Literature Survey
2.1 Definition and types of table and chairs
2.2 Chemistry and structure of timber and wood
2.3 Chemical components of wood
2.4 Categories of wood
2.5 Categories of wood
2.6 Uses of wood
2.7 Structure of timber
2.8 Wood pattern making
2.9 Pattern makers tools
Materials
Dowel pins
Types of patterns
Core points and core boxes
Timber and wood carving
Toothed cutting tools
Foaming or steel square.
CHAPTER THREE
3.0 Constructional procedure
3.1 Cutting list
3.2 Sketching and Drawing
3.3 Cutting
3.4 Assembling
3.5 Sand papering
3.6 Paderded
CHAPTER FOUR
4.0 Discussion
4.1 Conclusion
4.2 Recommendation
4.3 Appendices
4.4 References
Construction of Office Table and Chairs. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-office-table-and-chairs/
“Construction of Office Table and Chairs.” UniTopics, https://www.unitopics.com/project/material/construction-of-office-table-and-chairs/. Accessed 22 November 2024.
“Construction of Office Table and Chairs.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-office-table-and-chairs/
Here’s a typical structure for Construction of Office Table and Chairs research projects:
- The title page of Construction of Office Table and Chairs should include the project title, your name, institution, and date.
- The abstract of Construction of Office Table and Chairs should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction of Office Table and Chairs should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction of Office Table and Chairs, identifying gaps the study aims to fill.
- The methodology section of Construction of Office Table and Chairs should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction of Office Table and Chairs research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction of Office Table and Chairs results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction of Office Table and Chairs study and restate its significance.
- List all the sources you cited in Construction of Office Table and Chairs project, following a specific citation style (e.g., APA, MLA, Chicago).