Construction Of Metallic Book Shelve

ABSTRACT

The importance of books is gaining new insight or perspectives on issues that matter to the reader that helps them to have a new understanding of the world around them. Readers can apply the insight in everyday life or as a way of building upon the knowledge that already encompasses their mind and enrich their lives.
Books are used recoding of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects attacked, this brings about the deign and construction of a metallic bookshelf that will be economically cheap and equally meet up its demands.

This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces.
What is taken into consideration in this project are the cost of its production, processes, and maintenance.
Other considerable factors are the functional aspect of the plant/equipment and its durability as well as the reliability. Portability, stability and the physical appearance of the entire equipment.

Furthermore, the major result obtained from the construction were up to standard of a recommended book shelve. The cost for labour, purchasement, transportation, machine, and general total cost was N24,000.00 only (Twenty four thousand Naria only).

TABLE CONTENT

Title page

Approval page

Dedication

Acknowledgement

Abstract

Table of content

Letter of transmittal

CHAPTER ONE                           

Introduction

CHAPTER TWO

Literature Review

CHAPTER THREE

Sequence of operation (constructional procedure)

CHAPTER FOUR

Discussion

CHAPTER FIVE

Conclusion and Recommendation

Cost Estimation

References (Bibliography)

CHAPTER  ONE

1.0                                       INTRODUCTION

1.1                                 BACKGROUND OF THE STUDY

A book shelve is a set of shelves with doors either built into a room offices or industries as a fixed, or a separate piece of furniture, used for utensils, provisions, clothing, storing, book shelves etc. those cupboard used in the libraries and offices for packing books are called book shelves.

In the industries, materials are stored in cupboard refer as a facility for storage.

In material selection for the construction of any cupboard strongly depends on the properties and purposes the cupboard will serve. Generally, considering all the materials of construction, it can be seen that, for instance, both metals and non- metals have their individual merits. But in companism, metals have a lot of advantages over non-metals.

For instance, while many types of metal are suitable for high temperature operation, non-metals such as wood and glass are suitable for lower and limited range of temperatures. Metals posses a wider range of chemical stability them non-metals. So, it can be said that the obvious advantage of first cost cheapness of non-metallic materials is counseled by other disadvantages of non-metals, the most glaring of which is that of narrow applicability. Considering the cost also, the first cost of materials is even not takes as a sufficient indicator on which to base the selection of construction materials. The following cost factors among other must also be considered. Fabrication cost, installation cost, maintenance cost and cost of replacement. These cost factors must be considered in the material selection for construction.

Books shelve desire it name and purpose sometimes from the material of construction and also the shape it takes. Most book shelves built in homes, usually used for lairing clothes, serves the purposed of protecting clothes for the dust and other things and so, they are arranged in a chronological order, files are also arranged in arc inside the book shelve for protection of the necessary documents of the institution. Such cupboards are normally refers to as bookshelves. It is usually made of metals.

Most cupboards used for domestic purposes such as keeping of dishes and provisions, are usually made of wood, and in this case, there is no observation of all the operation involved in the construction of metal cupboard.

This is because of the soft nature of wood.

Instead of the use of guillotine saw is used in the cutting off, of the excess of use of the wood during construction instead the use of welding, nail is used in the arrangement of the different parts of cupboard. Another major different between those cupboard made of wood and those made of metal is that, wooden cupboard cannot protect the trough inside it in presence of fire outbreak without getting burnt

There are several types of metals that can be used for construction. Metals for contraction include: Gold, Silver, Aluminum, Bronze, Steel, and Iron. There are usually about three types of steel, as it constitutes the widest use metal. These types include low carbon-steel that has about 0.3%-0.4% carbon contain about 0.3%-0.6% carbon, and high carbon steel that contain about 0.7%-20%carbon.

Steel are used in the construction of metal cupboard, this is because it is soft to cutting, bending and several operation applied to the metal during construction. The galvanized type of steel has a nature of stainless steel and so does not support rust.

Because of this, it is not painted after using it for construction. In fabrication of sheets of metals, several types of gauge are produced and these include, gauge 22, gauge 20, gauge18, gauge16, gauge14, gauge12 and gauge10.

G auge18 and gauge16 are the best types of metal bookshelves.

1.2                                 PROBLEM STATEMENT

This book shelve will primarily can help people especially members of students to store the book after using it. The placement of book is not compatible because it located on table. After using the book student only compiles the book and so that, the arrangement of the book is not regulated and scattered. Thus, the development of this book shelve is hope can provide better arrangement at the book by store it at on place.

1.3                          OBJECTIVE OF THE PROJECT

This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces.

So the objectives of this project are:

• To design book shelve that is suite to its application especially for loading items.
• To minimize the manufacturing cost by minimize the complexity of the book shelve and simulate the material used with cheaper material but having high strength and endurance.
• To fabricate and introduce the new concepts and ideas for future prospect of book shelve.

1.4                                 SIGNIFICANCE OF THE PROJECT

A lot of people tend to prefer a metal shelf over a wooden one, for various reasons. First of all, metal shelving is in many cases more economical than wooden shelving, since the latter naturally involves more craftsmanship and skill. Moreover, metal shelves do not require a lot of maintenance, and can be easily kept clean and tidy. Even repairing a metal shelf is much simpler than trying to repair a wooden shelf. Three very popular types of metal used for shelves are stainless steel, chrome and wrought iron.

1.5                         LIMITATION OF THE PROJECT

Metal shelve is known for being tough and heavy.  Because of how tough it is, you can often use less, partially negating the weight.  It can be a little harder to work with. It is more costly than wooden shelve.

1.6                                 SCOPE OF THE PROJECT

In this work, valuable data are searched and gathered. Considering the shape of the book rack in terms of its complexity and method to produce.

Sketching and designing using Solid work software in creating the design of the book shelve. Fabricate and produce the book rack by using all necessary manufacturing process such as welding, bending, punching, grinding, measuring, marking and painting.

Simulate the mechanism of the book shelve produce is in line with the expected function to be.

1.7                        DIFFERENT KINDS OF METAL SHELVING

Stainless Steel Shelves

Steel is used abundantly in shelving projects, especially by industries, since it has many advantages over other types of shelving. Indeed, steel is best suited in the working environment, since it withstands a lot of damage as well as high temperatures. In companies operating under fire or explosive hazards, steel shelving provides a safe option when compared to other alternatives.

When it comes to the food industry, steel is also the preferred metal for shelves. Many restaurants use steel shelving to store food since steel allows a better circulation of air, and is also very strong when it comes to supporting heavy crates of food and drinks. Ease of cleaning is, of course, another important aspect–steel can withstand scrubbing and bleach.

Inevitably, steel shelving solutions are a bit more expensive than other alternatives, but then again quality products always cost more. In the long run, the durability of steel shelving may well save a lot of money which would otherwise have been spent to replace a different shelving choice.

Chrome Wire Shelves

Chrome wire shelving is renowned for its versatility and relative inexpensiveness. They are also strong and can resist denting better than other metal shelving. Most importantly, chrome shelving can be used in a wide range of places for home or industrial use: utility rooms, garages, mudrooms, pantries, dormitories and even offices. Chrome shelves are used both as storage units as well as display units.

As a material, chrome is regarded as being elegant, tasteful and clean, not to mention that it matches with just about anything. If you take care of a chrome shelving unit, it can retain its beauty and functionality for a long time. Moreover, chrome wire shelving is far less cumbersome than other traditional furniture, and is easy to assemble.

Chrome wire shelving is thus recommended to anyone who is frequently moving from one residence to another, as well as for those who are a bit low on funds but still want something tasteful and of good quality.

Wrought Iron Shelves

Wrought iron furniture in general is widely considered to be the most elegant style of furniture available, as well as being classy, design friendly and durable. This last feature is perhaps one of the best aspects of wrought iron shelves, since its durability and water resistance make it practically indestructible. Shelves made out of wrought iron can hold any weight and size without damage.

Clearly, wrought iron shelving is also chosen for its elegance and appearance. Indeed, wrought iron furniture in general is suitable both for old-fashioned and antique décor, as well as for modern homes.

Unfortunately, wrought iron shelving may be quite expensive, but as in the case of steel shelving, it is more worth it in the long run. The quality, durability and elegance of wrought iron thus outweigh the disadvantage of elevated costs. Another possible disadvantage of this type of shelving is its susceptibility to environmental changes. Since iron is a good conductor, wrought iron may become too cold in chilly weather and too hot in summer. Moreover, rust may also develop if the material not adequately taken care of. Painting wrought iron shelves regularly will ensure that they remain in a good condition through time.

Metal shelving may come in different kinds, most notably steel, chrome and wrought iron. The general advantages of metal shelves easily outnumber any disadvantages they may entail, making metal shelving a favorite amongst many people, both for homes and for businesses.