The project title “fabrication of flow nozzle” was done by a selected group of ND II Chemical Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of the nozzle and to be able to measure the quantity of fluid that will flow through the nozzle for a given period of time.
However, the construction of the nozzle was done with materials obtainable locally and the science of operation carried out in constructing the nozzle was; cleaning, marking out, cutting off, drilling, folding, centre punching, assembling, welding, filling, testing and painting.
The flow nozzle was constructed based on the following specifications and dimensions;
Throat Diameter 60mm
The diameter of the duct pipe 140mm
The length of the up stream pipe 200mm
The thickness of the nozzle 3.8mm
The length of the down stream pipe 200mm
The height of the nozzle 820mm
The length of the nozzle 690mm
The size of the pressure valves ½ inch
Furthermore, the selection of materials for the construction of this flow nozzle was based on the factors which includes; ductility, malleability, fabricability, mechanical strength and stability, availability, corrosion resistance and lastly cost factor.
Finally, the constructed flow nozzle and all other expenses cost N8,000.
Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement
Table of contents
Abstract
CHAPTER ONE
1.0 Introduction
1.1 Definition of flow nozzle
1.2 History of metering devices
1.3 The scope of the project
CHAPTER TWO
2.0 Literature review
2.1 Theory of flow nozzle
2.2 The characteristics of the nozzle
2.3 Types of flow nozzle
2.4 Advantages of flow nozzle
2.5 Disadvantages of flow nozzle
2.6 The uses of flow nozzle
CHAPTER THREE
3.0 The method of construction
CHAPTER FOUR
4.0 The Method Of Construction
CHAPTER FIVE
5.0 Discussion
5.1 Costing analysis
CHAPTER SIX
5.0 Conclusion
CHAPTER SEVEN
7.0 Recommendation
References
Nomenclature
Appendices
Construction Of Flow Nozzle. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-flow-nozzle/
“Construction Of Flow Nozzle.” UniTopics, https://www.unitopics.com/project/material/construction-of-flow-nozzle/. Accessed 25 November 2024.
“Construction Of Flow Nozzle.” UniTopics, Accessed November 25, 2024. https://www.unitopics.com/project/material/construction-of-flow-nozzle/
Here’s a typical structure for Construction Of Flow Nozzle research projects:
- The title page of Construction Of Flow Nozzle should include the project title, your name, institution, and date.
- The abstract of Construction Of Flow Nozzle should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of Flow Nozzle should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of Flow Nozzle, identifying gaps the study aims to fill.
- The methodology section of Construction Of Flow Nozzle should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of Flow Nozzle research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of Flow Nozzle results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of Flow Nozzle study and restate its significance.
- List all the sources you cited in Construction Of Flow Nozzle project, following a specific citation style (e.g., APA, MLA, Chicago).