This project work is on the construction of an F.M transmitter this system consists of four discrete modules namely the audio frequency (AF) amplifier (class A) the modulator the master oscillator and the radio frequency (RF) amplifier (ClassC) these formed the conventional events for building FM transmitter here the signal (from the microphone) is fed into the (AF) for amplification then to the modulator which combines the modulating signal with the carrier wave transports the modulated signal through (RF) for final amplification to the antenna via the resonance circuit for propagation the transmitter was tested using radio receiver it transmitted clearly at the frequency of 108 MH3 and the coverage was to metres.
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table Of Content
Chapter One
1.0 Introduction
1.1 Concept Of Modulation And Demodulation
1.2 Objective Of The Project
1.3 Significance Of The Project.
Chapter Two
2.0 Literature Review
2.1 Historical Background Of The Project
2.2 Theories And Models Relevant To The Construction
2.3 System Component Description
Chapter Three
3.0 Hardware Construction And Implementation
3.1 Block Diagram And System Specification
3.2 Construction Of Audio Frequency (Af) Amplifier Stage
3.3 Construction Of Radio Frequency (Rf) Amplifier Stage
3.4 Circuit Diagram Of Fm Transmitter
3.5 Circuit Component Analysis
3.6 Component List
Chapter Four
4.0 Methodology Packaging Testing And Results
4.1 Methodology
4.2 Packaging Of The System
4.3 Testing And Results
Chapter Five
5.0 Cost Analysis Problems Encountered
5.1 Recommendation And Conclusion
5.2 Cost Analysis
5.3 Problems Encountered
5.4 Recommendation
5.5 Conclusion
References
Construction Of An Fm Transmitter. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-an-fm-transmitter/
“Construction Of An Fm Transmitter.” UniTopics, https://www.unitopics.com/project/material/construction-of-an-fm-transmitter/. Accessed 25 November 2024.
“Construction Of An Fm Transmitter.” UniTopics, Accessed November 25, 2024. https://www.unitopics.com/project/material/construction-of-an-fm-transmitter/
Here’s a typical structure for Construction Of An Fm Transmitter research projects:
- The title page of Construction Of An Fm Transmitter should include the project title, your name, institution, and date.
- The abstract of Construction Of An Fm Transmitter should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of An Fm Transmitter should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of An Fm Transmitter, identifying gaps the study aims to fill.
- The methodology section of Construction Of An Fm Transmitter should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of An Fm Transmitter research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of An Fm Transmitter results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of An Fm Transmitter study and restate its significance.
- List all the sources you cited in Construction Of An Fm Transmitter project, following a specific citation style (e.g., APA, MLA, Chicago).