This project work inmvolves the construction of a bookshelf that is going to be use for storing of books and it is being constructed with wood and nail.
The wood used for the construction was seasoned mohagany wood that has preservatives and without defect.
During the construction of the bookshelf both mechanical processes was used to produce a suitable bookshelf.
The following are some of the tools and equipment used in the construction which includes hammer or driving the nails, saws for cuttinfg the woods, chisels and mallet for –opening the joints, some of the joints used in the construction includes a vertical and horizontal member of the shelves, terron joints, butt joints at the top cover member of the shelf and box joint.
The bookshelf is provided with a glass door at the front side of it and the frame of the glass have a key for purpose of locking to avoid unwanted persons from having access to anything stored in the bookshelf and the lower side of the bookshelf is constructed in a drawer foremost having ke9ys and handles.
The back of the bookshelf is made with a plywood and top, down and other components of it is made up of soft and hard woods with different dimensions.
The total width of the bookshelf is 1500mm (5ft) and the total light of the bookshop is 2100mm (7ft).
Title page
Approval page
Dedication
Acknowledgement
Table of content
CHAPTER ONE
1.0 Introduction
1.1 Aims and objectives of the study
1.2 Scope of the study
CHAPTER TWO
2.0 Literature review
2.1 Wood as a construction material
2.2 Classification of woods
2.3 Water contents of woods
2.4 Seasoning of wood
2.5 Methods of seasoning
2.7 Joints in timber
2.8 Historical development of timber
2.9 Types of Bookshelf
2.10 Uses of bookshelf
2.11 Maintenance of Bookshelf
CHAPTER THREE
3.0 Methodology
3.1 Materials and equipment needed
3.2 Preparation of the materials in the construction –
3.3 Assembles of the materials
3.4 Joining and fastening
3.5 Fastening
3.6 Safety precaution taken in preparation of bookshelf
CHAPTER FOUR
4.0 Presentation and discussion of result
4.1 Isometric view of the bookshelf
4.2 Front view of the bookshelf
4.3 Structural design of the bookshelf
CHAPTER FIVE
5.0 conclusion
5.1 Recommendation
5.2 References
Construction Of A Wooden Bookshelf. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-a-wooden-bookshelf/
“Construction Of A Wooden Bookshelf.” UniTopics, https://www.unitopics.com/project/material/construction-of-a-wooden-bookshelf/. Accessed 22 November 2024.
“Construction Of A Wooden Bookshelf.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-a-wooden-bookshelf/
Here’s a typical structure for Construction Of A Wooden Bookshelf research projects:
- The title page of Construction Of A Wooden Bookshelf should include the project title, your name, institution, and date.
- The abstract of Construction Of A Wooden Bookshelf should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of A Wooden Bookshelf should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of A Wooden Bookshelf, identifying gaps the study aims to fill.
- The methodology section of Construction Of A Wooden Bookshelf should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of A Wooden Bookshelf research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of A Wooden Bookshelf results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of A Wooden Bookshelf study and restate its significance.
- List all the sources you cited in Construction Of A Wooden Bookshelf project, following a specific citation style (e.g., APA, MLA, Chicago).