A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation.
The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. Some basic workshop practices was carried out during the construction such as the marking out of the metal sheet, cutting of different sizes of the sheet, welding of the prints, assembling of the components parts and painting of the equipment.
The material used in the construction of the mixer is mainly of mid steel. The mild steel was used for the construction due to its quality cost availability and characteristics.
The cost of constructing the motorized mixer was cheep due to the choice of material selected for the constructional project and it was finally painted with aluminum paint to protect it form corrosion.
The material dimension used in construction of the motorized mixer is as follows:
Length of vessel 700mm
Diameter of vessel 600mm
Length of shaft 800mm
Surface area of plastic vessel 1320000mm
Electric motor rating 733.3v 50/60HZ, 3728.5 watt
7000r pm
Title page
Letter of transmittal
Acknowledgement
Dedication
Abstract
Table of content
1.0 CHAPTER ONE –
INTRODUCTION
1.1 Problems encountered during mixing
1.2 Purpose of mixing
2.0 CHAPTER TWO
– LITERATURE REVIEW
Theory of mixing
Types of mixers
Classes of impellers
Types of impellers
Other types of mixers
Criteria of mixer effectiveness
Application of mixers
Functions of impellers
Mechanism of a pilot motorized mixer
Degree of mixing
Mixing rates
Selection of material
Steel for construction
Types of steel-in construction
Important properties of steel in construction
Protection of steel
CHAPTER THREE
Sequence of operation
Analysis of cost
Operation of the motorized mixer
CHAPTER FOUR
Conclusion/Recommendation
Nomenclature
References
Construction Of A Pilot Motorized Mixer. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-a-pilot-motorised-mixer/
“Construction Of A Pilot Motorized Mixer.” UniTopics, https://www.unitopics.com/project/material/construction-of-a-pilot-motorised-mixer/. Accessed 19 September 2024.
“Construction Of A Pilot Motorized Mixer.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/construction-of-a-pilot-motorised-mixer/
Here’s a typical structure for Construction Of A Pilot Motorized Mixer research projects:
- The title page of Construction Of A Pilot Motorized Mixer should include the project title, your name, institution, and date.
- The abstract of Construction Of A Pilot Motorized Mixer should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of A Pilot Motorized Mixer should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of A Pilot Motorized Mixer, identifying gaps the study aims to fill.
- The methodology section of Construction Of A Pilot Motorized Mixer should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of A Pilot Motorized Mixer research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of A Pilot Motorized Mixer results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of A Pilot Motorized Mixer study and restate its significance.
- List all the sources you cited in Construction Of A Pilot Motorized Mixer project, following a specific citation style (e.g., APA, MLA, Chicago).