The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form.
This project is constructed for the separation of liquid – liquid and solid – liquid mixture, like air and dust mixture, dust and liquid drop. This equipment is constructed to separate dust air mixture input of about 25m3/h.
The equipment was constructed with flat sheet metal plate of a desired standard. The dimensioned and for truncated parts were coupled and welded in other to fasten the parts together. The material used in this construction is mild sheet. This material was selected to avoid the effect of rust of material due to contact of the separating item or material with the walls of metal sheet.
In considering the rating of this instrument, it is capable of sparing a gas-dust mixture of about 70% pure compared to the one used in commercial industries. That has the offering of product at around 90% pure. The total material cost of this equipment is ten thousand naira (N10,000).
The effect of hydrocyclone had been of much help especially in the pharmaceutical and photographic industries in the process of particle size separation. It is use to separate a mixture of particle size within the range of 4 and 95 m. The moving or relative speed for this model during separation is 4mls.
Title Page
Letter Of Transmittal
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
Introduction 1
1.1 Objective Of The Project 2
CHAPTER TWO
Literature Review 4
2.1 Historical Review Of Particle Size Separation 5
2.2 Theory Of Particle Size Separation 6
2.3 Material Balance For Screening 7
2.4 Theory Of Operation 9
2.5 Uses Of Hydrocyclone 11
2.6 Types Of Mechanical Size Separation Equipment 12
2.7 Features Of The Hydrocyclone 14
2.8 Collection Efficiency Of A Typical Hydrocyclone 15
2.9 Costing Estimation 16
2.10 Disadvantages Of Hydrocyclone 17
2.11 Material Of Construction 18
CHAPTER THREE
3.1 Construction Of A Hydrocyclone 19
CHAPTER FOUR
4.1 Discussion 23
4.2 Recommendation 24
4.3 Conclusion 25
4.4 References 27
4.5 Table For Nomenclature 28
Appendix 29
Construction Of A Hydro Cyclone. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-a-hydro-cyclone/
“Construction Of A Hydro Cyclone.” UniTopics, https://www.unitopics.com/project/material/construction-of-a-hydro-cyclone/. Accessed 22 November 2024.
“Construction Of A Hydro Cyclone.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-a-hydro-cyclone/
Here’s a typical structure for Construction Of A Hydro Cyclone research projects:
- The title page of Construction Of A Hydro Cyclone should include the project title, your name, institution, and date.
- The abstract of Construction Of A Hydro Cyclone should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of A Hydro Cyclone should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of A Hydro Cyclone, identifying gaps the study aims to fill.
- The methodology section of Construction Of A Hydro Cyclone should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of A Hydro Cyclone research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of A Hydro Cyclone results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of A Hydro Cyclone study and restate its significance.
- List all the sources you cited in Construction Of A Hydro Cyclone project, following a specific citation style (e.g., APA, MLA, Chicago).