Project

»
Engineering
»
Electrical Electronics Engineering

Construction Of A GSM Based Home Automation Using Avr

Overview Cite Project
ABSTRACT
With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 minutes after the first call to initiate the next command. This project is made up of four vital units. These units are as follows: GSM module unit, peripheral interface control (PIC) unit, driver unit and a power monitoring and control unit. The GSM module is a GSM transceiver which gives the system access to the GSM service provider. The peripheral interface control (PIC) is programmed to carry out the OFF/ RESET operation according to the GSM commands while the driver and control unit consist of capacitors, resistors, diodes, regulators and electromagnetic relay is to effect power switching. The major component that performed the power control of 220v main supply and the automatic voltage regulation (AVR) is the automated electromagnetic relay. The project was realized.
TABLE OF CONTENTS

Title page
Certification page
Dedication
Acknowledgement
Abstract
Table of content

 

CHAPTER ONE:
1.0 INTRODUCTION
1.1 Introduction To The Project
1.2 Background Of Study
1.3 Problem Statement
1.4 Aims And Objectives
1.5 Scopes And Purpose Of System Specification
1.6 Limitations

CHAPTER TWO:
2.0 LITERATURE REVIEW
2.1 Review of Related Works
2.2 Home Automation System
2.3 Brief History of Tone Recognition Device
2.4 History of Home Automation
2.4.1 The Mechanical Evolution
2.4.2 The Electrical Evolution
2.4.3 The Information Revolution
2.5 Smart Home Today
2.6 Aspects of Automation Speech Recognition (ASR) Device

CHAPTER THREE:
3.0 SYSTEM ANALYSIS AND METHODOLOGY
3.1 Hardware Subsystem
3.2 System Analysis
3.3 Regulation Unit
3.4 The Power Supply
3.5 The Microcontroller
3.6 The System Flow Chart

CHAPTER FOUR:
4.0 CONSTRUCTION AND COMPONENT LIST
4.1 Construction
4.2 Constructional Methods
4.3 Power Supply Unit (PSU)
4.3 Mounting of Components
4.4 Interconnection of Components
4.6 Bill of Engineering Materials and Evaluation (BEME)

CHAPTER FIVE:
5.0 RECOMMENDATION, CONCLUSION AND CONSTRAINTS
5.1 Conclusion
5.2 Recommendation
5.3 Major Constraint
5.4 Constraint Consideration
5.5 Technology Consideration
Reference

APA

Construction Of A GSM Based Home Automation Using Avr. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-a-gsm-based-home-automation-using-avr/

MLA

“Construction Of A GSM Based Home Automation Using Avr.” UniTopics, https://www.unitopics.com/project/material/construction-of-a-gsm-based-home-automation-using-avr/. Accessed 22 November 2024.

Chicago

“Construction Of A GSM Based Home Automation Using Avr.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-a-gsm-based-home-automation-using-avr/

WORK DETAILS
Chapters:
5
Pages:
57
Words:
6543
RELATED PROJECT TOPICS:
Project Structure

Here’s a typical structure for Construction Of A GSM Based Home Automation Using Avr research projects:

  • The title page of Construction Of A GSM Based Home Automation Using Avr should include the project title, your name, institution, and date.
  • The abstract of Construction Of A GSM Based Home Automation Using Avr should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
  • The introduction of Construction Of A GSM Based Home Automation Using Avr should provide the background information, outline the research problem, and state the objectives and significance of the study.
  • Review existing research related to Construction Of A GSM Based Home Automation Using Avr, identifying gaps the study aims to fill.
  • The methodology section of Construction Of A GSM Based Home Automation Using Avr should describe the research design, data collection methods, and analytical techniques used.
  • Present the findings of the Construction Of A GSM Based Home Automation Using Avr research study using tables, charts, and graphs to illustrate key points.
  • Interpret Construction Of A GSM Based Home Automation Using Avr results, discussing their implications, limitations, and potential areas for future research.
  • Summarize the main findings of the Construction Of A GSM Based Home Automation Using Avr study and restate its significance.
  • List all the sources you cited in Construction Of A GSM Based Home Automation Using Avr project, following a specific citation style (e.g., APA, MLA, Chicago).
WORK DETAILS
Chapters:
5
Pages:
57
Words:
6543
RELATED TOPICS