LPG gas is commonly used in our home for cooking purpose. LPG is used in school and college canteens; also it is used in various industries. Accidents never happen with a prior intimation. There are chances of gas leakage due to some negligence or as a result of faulty cylinder. In such cases, if leakage is not detected at an early stage, then it can create huge damages. Arduino microcontroller based LPG gas leakage detector can be used in such situations. This LPG leakage detector is implemented using a ATmega8 microcontroller and MQ-6 gas sensor.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 AIM/ OBJECTIVE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 SIGNIFICANCE OF THE PROJECT
1.6 JUSTIFICATION OF THE STUDY
CHAPTER TWO
LITERATURE REVIEW
2.0 INTRODUCTION
2.1 A BRIEF HISTORY OF GAS DETECTION SYSTEM
2.2 TYPES OF GAS DETECTORS
2.3 LIQUIFIED PETROLEUM GASES (LPGs)
2.4 PREVIOUS STUDIES RELATED TO GAS DETECTION SYSTEM
2.5 COMPONENT REVIEW
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM BLOCK DIAGRAM
3.2 MODE OF OPERATION
3.3 DESIGN PROCEDURES
3.4 IMPORTANT TOOLS AND COMPONENTS USED
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE
4.2 PACKAGING
4.3 ASSEMBLING OF SECTIONS
4.5 TESTING OF SYSTEM OPERATION
4.3 INSTALLATION OF THE COMPLETED DESIGN
4.4 TESTING
4.5 RESULT ANALYSIS
4.6 BILL OF ENGINEERING MEASUREMENTS AND EVALUATION
CHAPTER FIVE
5.0 SUMMARY, CONCLUSION AND RECOMMENDATION
5.1 SUMMARY
5.2 CONCLUSION
5.3 RECOMMENDATION
REFERENCES
Construction Of A Gas Leakage Detector Alarm Using Microcontroller. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-a-gas-leakage-detector-alarm-using-microcontroller/
“Construction Of A Gas Leakage Detector Alarm Using Microcontroller.” UniTopics, https://www.unitopics.com/project/material/construction-of-a-gas-leakage-detector-alarm-using-microcontroller/. Accessed 22 November 2024.
“Construction Of A Gas Leakage Detector Alarm Using Microcontroller.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/construction-of-a-gas-leakage-detector-alarm-using-microcontroller/
Here’s a typical structure for Construction Of A Gas Leakage Detector Alarm Using Microcontroller research projects:
- The title page of Construction Of A Gas Leakage Detector Alarm Using Microcontroller should include the project title, your name, institution, and date.
- The abstract of Construction Of A Gas Leakage Detector Alarm Using Microcontroller should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of A Gas Leakage Detector Alarm Using Microcontroller should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of A Gas Leakage Detector Alarm Using Microcontroller, identifying gaps the study aims to fill.
- The methodology section of Construction Of A Gas Leakage Detector Alarm Using Microcontroller should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of A Gas Leakage Detector Alarm Using Microcontroller research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of A Gas Leakage Detector Alarm Using Microcontroller results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of A Gas Leakage Detector Alarm Using Microcontroller study and restate its significance.
- List all the sources you cited in Construction Of A Gas Leakage Detector Alarm Using Microcontroller project, following a specific citation style (e.g., APA, MLA, Chicago).