Audio loudspeaker (output transducer) is on of the most essential and powerful device used in telecommunication system. This is device capable of converting electrical signal into sound and vice versa. It is made up of few time of non-magnetic wire wound on a light cylindrical former that is mounted so that it can move freely insides the magnetic field of a strong permanent magnet. The speaker cone it attached to the voice coil and attached with a flexible mounting to outer ting of the speaker support.
The device was contracted and operated based on the principles of electromagnetic induction which was clearly stated by faradays and langue laws of electromagnetic induction. This speaker has power rating of low watts and 16ohms impedance
The materials used in made up of particle board of ¾ thickness tweeter and cross over network..
This device constructed locally can compete favourably well with the imported one (with international standard) the information in this write up comprises of the construction operation a detailed information of each component parts and various used of output transducer (loudspeaker).
Title Page
Certification
Dedication
Abstract
Table Of Content
Chapter One
1.0 Introduction
1.1 Background Information
1.2 Aim
Chapter Two
2.0 Literature Review
2.1 Function Of Various Parts Of Loudspeaker
2.2 Working Principles Of A Loudspeaker
Chapter Three
3.0 Meaning Of Crossover
3.1 Component Parts Of Crossover
3.2 Crossover Design
3.3 General Methodology Of Crossover Design
Chapter Four
4.0 Meaning Of A Tweeter
4.1 Operation Of A Tweeter
4.2 Dome Fluid
4.3 Ferro Fluid
4.4 Types Of Tweeter
Chapter Five
5.0 Enclosure
5.1 Requirement Of Speaker Enclosure
Chapter Six
6.0 Conclusion
6.1 Speaker Safety
6.2 Cost Of Construction
6.3 Discussion
References
Construction Of 150 Watts 162 Audio Loudspeaker. (n.d.). UniTopics. https://www.unitopics.com/project/material/construction-of-150-watts-162-audio-loudspeaker/
“Construction Of 150 Watts 162 Audio Loudspeaker.” UniTopics, https://www.unitopics.com/project/material/construction-of-150-watts-162-audio-loudspeaker/. Accessed 20 September 2024.
“Construction Of 150 Watts 162 Audio Loudspeaker.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/construction-of-150-watts-162-audio-loudspeaker/
Here’s a typical structure for Construction Of 150 Watts 162 Audio Loudspeaker research projects:
- The title page of Construction Of 150 Watts 162 Audio Loudspeaker should include the project title, your name, institution, and date.
- The abstract of Construction Of 150 Watts 162 Audio Loudspeaker should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of 150 Watts 162 Audio Loudspeaker should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of 150 Watts 162 Audio Loudspeaker, identifying gaps the study aims to fill.
- The methodology section of Construction Of 150 Watts 162 Audio Loudspeaker should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of 150 Watts 162 Audio Loudspeaker research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of 150 Watts 162 Audio Loudspeaker results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of 150 Watts 162 Audio Loudspeaker study and restate its significance.
- List all the sources you cited in Construction Of 150 Watts 162 Audio Loudspeaker project, following a specific citation style (e.g., APA, MLA, Chicago).