This project is aimed at the automation or computerization of the diagnosis and treatment of tuberculosis “a case study of Federal Medical Center, Bida” its patient are to be diagnosed using computer platform instead of using patient sputum samples to generate result for treatments. This project was accomplished using the modernized version of Q basic and basic (beginner’s all-purpose symbolic instruction code) programming language called the visual basic 2010, and micro soft access as the database. The scope of the work is only to diagnose and treat tuberculosis disease only. And this is to be achieved by using patient’s symptoms to determine if the patient is a carrier or not. The advantages of this system are that its saves time, it helps in accurate record keeping and its help human effort. The programmed code was developed, tested and a sample of output result is attached in the appendix. And procedure for the program installation has been included as well as recommendation for effective and optimum performance.
Certification Page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
1.0 General overview 1
1.1 Introduction 1
1.2 Statement of problem 4
1.3 Aim and Objectives 5
1.4 Scope and Limitation 6
1.5 Significance of the study 6
1.6 Definition of terms 7
CHAPTER TWO
2.0 Literature Review and System Analysis
2.1 Literature Review 9
2.2 Feasibility Study 12
2.3 System Analysis 14
2.3.1 Fact Finding 14
2.4 Analysis of the Existing System 15
2.5 Statement of Problem/Problems of the Existing System 16
2.6 Solution to the Problem 18
CHAPTER THREE
3.0 System Design 19
3.1 Architectural Design 19
3.2 Abstract Specification 19
3.3 Interface Design 20
3.4 Data Structure Design 22
3.5 Algorithm Design 22
CHAPTER FOUR
4.0 System Implementation and Documentation 23
4.1 System Implementation 23
4.2 Choice of Programming Language 23
4.3 SystemRequirement 24
4.3.1 Installation Requirement 24
4.3.2 Hardware Requirement 24
4.3.3 Software Requirement 25
4.4 Process of Installation 25
4.5 System Testing 26
4.6 System Change Over 27
4.7 System Documentation 28
CHAPTER FIVE
5.0 Summary, Conclusion and Recommendations 29
5.1 Summary 29
5.2 Conclusion 29
5.3 Recommendation 30
REFERENCES 32
Appendix A (Flow Charts) 35
Appendix B (Program Interfaces) 37
Appendix C (Some Program Codes) 41
Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis. (n.d.). UniTopics. https://www.unitopics.com/project/material/automation-or-computerization-of-the-diagnosis-and-treatment-of-tuberculosis/
“Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis.” UniTopics, https://www.unitopics.com/project/material/automation-or-computerization-of-the-diagnosis-and-treatment-of-tuberculosis/. Accessed 22 November 2024.
“Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/automation-or-computerization-of-the-diagnosis-and-treatment-of-tuberculosis/
Here’s a typical structure for Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis research projects:
- The title page of Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis should include the project title, your name, institution, and date.
- The abstract of Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis, identifying gaps the study aims to fill.
- The methodology section of Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis research study using tables, charts, and graphs to illustrate key points.
- Interpret Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis study and restate its significance.
- List all the sources you cited in Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis project, following a specific citation style (e.g., APA, MLA, Chicago).