It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process.
The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring down the cost of cement by investigating into alternative source of raw material for cement production and hence this project.
From literature, rice husk ash, Ukpo day,& Nsu day contain the basic mineral constituents which limestone has. Rice husk was burnt temperatures of 5000c, 6000c, 7000c, and 8000c. The best ash was obtained at a temperature of 7000c,. the above material were also analyzed to determine their mineral constituents. The result shown that rice husk contains little aluminum (Al203) and no lime (Ca0). To make up for these mineral constituents, Upo day which is rich in aluming was blended with lime(Ca0)-a bye product from gas plant and the three minerals were blended using the method of lime saturation factor. A blending ratio of 70% lime 20% PHA and 10% Alumina mixture (Ukpo day) was used. The mixture was mixed dry by dry process and burnt in a furnace at a temperature of 12000c. the resulting mass known as dinker was ground with 5% gypsum. The cement obtained gave a comprehensive strength of 2N/mr2.
Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Abstract
Definition of terms
Table of content
CHAPTER ONE
INTRODUCTION
1.1 Background of the study
1.2 Purpose of the study
1.3 Scope of the project
1.4 Significance of the study
1.5 Limitation of study
CHAPTER TWO
LITERATURE REVIEW
2.1 LIME AND ITS USES
2.2 CONVERSION OF RICH HUSK TO ASH
2.3 BASIC CEMENT RAW MATERIALS
2.4 TYPES OF CEMENT
2.5 CEMENT CHEMISTRY
CHAPTER THREE
3.0 EXPENRIMENTAL WORK
3.1 PYROPROCESSING OF THE RICE HUSK
3.2 TERATMENT AND ANALYSIS OF THE LIME
3.3 COMPOUNDING OF THE RAWMIX
3.4 MANAUFACTURING PROCESS
CHAPTER FOUR
ANALYSIS AND DISCUSSION OF RESULT
CHAPTER FIVE
CONCLUSION AND RECOMMENDATION
RECOMMENDATION
REFERENCES
Alternative Raw Material Sources For Cement Production. (n.d.). UniTopics. https://www.unitopics.com/project/material/alternative-raw-material-soures-for-cement-production/
“Alternative Raw Material Sources For Cement Production.” UniTopics, https://www.unitopics.com/project/material/alternative-raw-material-soures-for-cement-production/. Accessed 18 January 2025.
“Alternative Raw Material Sources For Cement Production.” UniTopics, Accessed January 18, 2025. https://www.unitopics.com/project/material/alternative-raw-material-soures-for-cement-production/
Here’s a typical structure for Alternative Raw Material Sources For Cement Production research projects:
- The title page of Alternative Raw Material Sources For Cement Production should include the project title, your name, institution, and date.
- The abstract of Alternative Raw Material Sources For Cement Production should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Alternative Raw Material Sources For Cement Production should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Alternative Raw Material Sources For Cement Production, identifying gaps the study aims to fill.
- The methodology section of Alternative Raw Material Sources For Cement Production should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Alternative Raw Material Sources For Cement Production research study using tables, charts, and graphs to illustrate key points.
- Interpret Alternative Raw Material Sources For Cement Production results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Alternative Raw Material Sources For Cement Production study and restate its significance.
- List all the sources you cited in Alternative Raw Material Sources For Cement Production project, following a specific citation style (e.g., APA, MLA, Chicago).